Heat flow, thermal analysis and structural simulation through thin film of Synthesized Al2O3-ZrO2 nanocomposite
Main Article Content
Abstract
Nanocomposite has found application in the modern field of technology based on its specific properties. A nanocomposite of alumina and zirconia (Al2O3-ZrO2) was synthesized using a simple Sol-Gel technique and sintered at different temperatures from 500 ºC to 1100 C with an interval of 200 ºC. A thin film was deposited on a 1 mm thick aluminum sheet. The structural simulation of the deposited thin film was analyzed using ANSYS. Particle size and phase are verified by XRD. DSC-TGA (SDT) analysis was used to determine the 1100 ºC of Al2O3/ZrO2 nanocomposite for thin film by dipping method. SEM Material morphology of the synthesized material performed by the SEM method in particle size 90-100nm.
Article Details
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Pakistan Journal Emerging Science and Technologies (PJEST) in collaboration with Govt. Islamia Graduate College Civil Lines Lahore, Pakistan is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
References
S. Sarker, H. T. Mumu, M. Al-Amin, M. Zahangir Alam, and M. A. Gafur, "Impacts of inclusion of additives on physical, microstructural, and mechanical properties of Alumina and Zirconia toughened alumina (ZTA) ceramic composite: A review," Materials Today: Proceedings, vol. 62, pp. 2892-2918, 2022/01/01/ 2022.
J. Gao, T. Li, Z. Yan, S. Liu, Y. Zhao, and W. Tong, "Research on the interface and properties of spherical ZTA particles reinforced Fe-Cr-B matrix composite," Journal of Materials Research and Technology, vol. 19, pp. 1322-1331, 2022/07/01/ 2022.
S. Li, L. Niu, Y. Zhu, J. Chai, Z. Wang, and E. Xie, "Mechanical and thermal properties of ZrC/ZTA composites prepared by spark plasma sintering," Ceramics International, vol. 48, pp. 6453-6460, 2022/03/01/ 2022.
M. A. J. Selvam, S. Arunkumar, V. Balambica, S. Padmanabhan, T. V. Kumar, and V. S. Shai Sundaram, "Influence of copper anodization on structural and heat transfer characteristic of aluminum piston," Materials Today: Proceedings, vol. 59, pp. 1407-1413, 2022/01/01/ 2022.
B. A. Witika, V. J. Smith, and R. B. Walker, "Top-Down Synthesis of a Lamivudine-Zidovudine Nano Co-Crystal," Crystals, vol. 11, p. 33, 2021.
M. B. Gawande, A. Goswami, F.-X. Felpin, T. Asefa, X. Huang, R. Silva, X. Zou, R. Zboril, and R. S. Varma, "Cu and Cu-Based Nanoparticles: Synthesis and Applications in Catalysis," Chemical Reviews, vol. 116, pp. 3722-3811, 2016/03/23 2016.
M. W. Alam, H. S. Al Qahtani, B. Souayeh, W. Ahmed, H. Albalawi, M. Farhan, A. Abuzir, and S. Naeem, "Novel Copper-Zinc-Manganese Ternary Metal Oxide Nanocomposite as Heterogeneous Catalyst for Glucose Sensor and Antibacterial Activity," Antioxidants, vol. 11, p. 1064, 2022.
S. Paknia, Z. Izadi, M. Moosaipour, S. Moradi, B. Khalilzadeh, M. Jaymand, and H. Samadian, "Fabrication and characterization of electroconductive/osteoconductive hydrogel nanocomposite based on poly(dopamine-co-aniline) containing calcium phosphate nanoparticles," Journal of Molecular Liquids, vol. 362, p. 119701, 2022/09/15/ 2022.
W. Zhou, P. Wu, L. Zhang, S. Yao, D. Zhu, and Y. Cai, "Layer-by-layer assembly of nanocomposite interlayers on a kaolin substrate for enhancing membrane performance of Pb(II) and Cd(II) removal," Science of The Total Environment, vol. 820, p. 153149, 2022/05/10/ 2022.
Y. Song, F. Yang, M. Ma, Y. Kang, A. Hui, Z. Quan, and A. Wang, "Green synthesized Se–ZnO/attapulgite nanocomposites using Aloe vera leaf extract: Characterization, antibacterial and antioxidant activities," LWT, vol. 165, p. 113762, 2022/08/01/ 2022.
S. Akbarzadeh, L. Sopchenski Santos, V. Vitry, Y. Paint, and M.-G. Olivier, "Improvement of the corrosion performance of AA2024 alloy by a duplex PEO/clay modified sol-gel nanocomposite coating," Surface and Coatings Technology, vol. 434, p. 128168, 2022/03/25/ 2022.
K. S. Burts, T. V. Plisko, V. G. Prozorovich, G. B. Melnikova, A. I. Ivanets, and A. V. Bildyukevich, "Development and Study of PVA–SiO2/poly(AN-co-MA) Dynamic Nanocomposite Membranes for Ethanol Dehydration via Pervaporation," Membranes and Membrane Technologies, vol. 4, pp. 101-110, 2022/04/01 2022.
L. Sarango, L. Paseta, M. Navarro, B. Zornoza, and J. Coronas, "Controlled deposition of MOFs by dip-coating in thin film nanocomposite membranes for organic solvent nanofiltration," Journal of Industrial and Engineering Chemistry, vol. 59, pp. 8-16, 2018/03/25/ 2018.
X. Chen, "Synthesis and characterization of ATO/SiO2 nanocomposite coating obtained by sol–gel method," Materials Letters, vol. 59, pp. 1239-1242, 2005/04/01/ 2005.
O. Razavizadeh and M. Ghorbani, "Sol–gel preparation and corrosion properties of Zn–SiO2 nanocomposite thin film," Journal of Sol-Gel Science and Technology, vol. 79, pp. 133-143, 2016/07/01 2016.
A. A. Silva, R. A. Pinheiro, C. d. A. Razzino, V. J. Trava-Airoldi, and E. J. Corat, "Thin-film nanocomposites of BDD/CNT deposited on carbon fiber," Diamond and Related Materials, vol. 75, pp. 116-122, 2017/05/01/ 2017.
H. Zaka, S. S. Fouad, B. Parditka, A. E. Bekheet, H. E. Atyia, M. Medhat, and Z. Erdélyi, "Enhancement of dispersion optical parameters of Al2O3/ZnO thin films fabricated by ALD," Solar Energy, vol. 205, pp. 79-87, 2020/07/15/ 2020.
D. Gupta, V. Chauhan, N. Koratkar, F. Singh, A. Kumar, S. Kumar, and R. Kumar, "High energy (MeV) ion beam induced modifications in Al2O3-ZnO multilayers thin films grown by ALD and enhancement in photoluminescence, optical and structural properties," Vacuum, vol. 192, p. 110435, 2021/10/01/ 2021.
A. A. Chaaya, R. Viter, I. Baleviciute, M. Bechelany, A. Ramanavicius, Z. Gertnere, D. Erts, V. Smyntyna, and P. Miele, "Tuning Optical Properties of Al2O3/ZnO Nanolaminates Synthesized by Atomic Layer Deposition," The Journal of Physical Chemistry C, vol. 118, pp. 3811-3819, 2014/02/20 2014.
J. Cortez-Elizalde, A. A. Silahua-Pavón, G. E. Córdova-Pérez, J. C. Arévalo-Pérez, Z. Guerra-Que, C. G. Espinosa-González, F. Ortíz-Chi, S. Godavarthi, and J. G. Torres-Torres, "Production of 5-Hydroxymethylfurfural from glucose using Al2O3-TiO2-ZrO2 ternary catalysts," Catalysis Today, vol. 392-393, pp. 116-130, 2022/06/01/ 2022.
Y. Bai, S. W. Lee, H. Chen, F. Li Yu, and J. F. Yang, "Characterization of the Near-Eutectic Al2O3–40 wt% ZrO2 Composite Coating Fabricated by Atmospheric Plasma Spray. Part I: Preparation and Characterization of Nano Al2O3–ZrO2 Powder Using Sol–Gel Method," Materials and Manufacturing Processes, vol. 26, pp. 330-337, 2011/01/31 2011.
J. I. Peña, R. I. Merino, N. R. Harlan, A. Larrea, G. F. de la Fuente, and V. M. Orera, "Microstructure of Y2O3 doped Al2O3–ZrO2 eutectics grown by the laser floating zone method," Journal of the European Ceramic Society, vol. 22, pp. 2595-2602, 2002/01/01/ 2002.
J. Gao, W. Su, X. Song, Y. Bai, J. Wang, and G. Yu, "Post-mortem analysis of Cr2O3-Al2O3-ZrO2 refractory bricks used in an industrial opposed multi-burner gasifier," Engineering Failure Analysis, vol. 134, p. 106017, 2022/04/01/ 2022.
E. Postek and T. Sadowski, "Impact model of the Al2O3/ZrO2 composite by peridynamics," Composite Structures, vol. 271, p. 114071, 2021/09/01/ 2021.